Chlorine
After the batch composition has been validated, the cartridge is designed to help reduce chlorine in shower water.

*The lighting effects visible in some images are graphic elements used for presentation and are not part of the physical product.
Shower filtration
After the batch composition has been validated, the cartridge is designed to help reduce chlorine in shower water.
The multistage cartridge can help retain certain particles; performance varies with water and use.
Filtration can help improve certain odour characteristics of shower water.
Filtration
Replaceable multistage cartridge measuring about Ø 57 × 83 mm. The exact media composition must match the OZANA batch specification.
The exact media content must match the OZANA batch specification.
Designed to improve certain water characteristics without producing drinking water.
The internal cartridge can be replaced without replacing the complete housing.
System data
The published specifications reflect the information currently documented for this system.
Maintenance
OZANA currently recommends replacement about every six months, or sooner if flow decreases or the initial water characteristics return.
Actual frequency varies with water quality, temperature, flow rate and frequency of use.
Before first use
For shower water only. STORM does not produce drinking water and does not disinfect a contaminated source. Potential skin or hair benefits are not medical claims.
Installation and maintenance in accordance with the instructions help the system operate properly.
Depending on the system
Actual results vary with water quality, installation, flow rate and maintenance.
Ø 70 × 125 mmØ 57 × 83 mm cartridgeAbout 2 replacements per yearChlorine
Visible sediment
Odours
OZANA selection
We select our systems and components according to recognized standards for performance, material quality and safety.
Installation
No electrical supply. Hand-install the filter, check for leaks and flush the cartridge.
Watch the videoShut off the water and remove the showerhead or hose.
Clean the threads, position the washer and add thread-seal tape if required.
Hand-tighten the filter, then reinstall the showerhead or hose.
Turn on the water, check for leaks and flush the cartridge.